Rear Axle Bearing Remover Set
modèle :
AET-00690K
AET-00690K
Rear Axle Bearing Remover Set
●Used for removing rear axle bearings
from rear axle housing after is removed.
Instructions:
●Always Wear Safety Glasses
And Gloves.
1. Carefully measure the diameter of
the bearing to be pulled and match it
with the correct size pulling adapter
attachment.
2. Assemble pulling adapter (A, B or C)
to a Slide Hammer 27033 or equivalent
with a 5/8" X 18 thread and insert adapter
to the inner side of the bearing to be pulled.
3. Apply a tight slide hammer stroke with increasing
pressure until the bearing is removed from the housing.
Rear Axle Bearing Remover Set
●Used for removing rear axle bearings
from rear axle housing after is removed.
Instructions:
●Always Wear Safety Glasses
And Gloves.
1. Carefully measure the diameter of
the bearing to be pulled and match it
with the correct size pulling adapter
attachment.
2. Assemble pulling adapter (A, B or C)
to a Slide Hammer 27033 or equivalent
with a 5/8" X 18 thread and insert adapter
to the inner side of the bearing to be pulled.
3. Apply a tight slide hammer stroke with increasing
pressure until the bearing is removed from the housing.
